Reply to this topicStart new topic
> Engine Died..now does not start.
111
post Mar 7 2005, 07:37 PM
Post #1


Newbie


Group: Guests
Posts: 0
Joined: 16-June 08
Member No.: 2,304
Location: USA
Drives: Honda



Hello all, I am new to this group. My wife recently had a radio/cd installed that has the removable face plate. Well..she was messing around with reseating the face plate WHILE THE ENGINE WAS RUNNING and suddenly it just died. Now it will not start. I suspected a fuse someplace had blown but a check of the fuse panel under the hood and user the dash with a DVM meter finds no fuses blown. Any ideas? Thanks Jerry
Go to the top of the page
 
+Quote Post
111
post Mar 7 2005, 08:10 PM
Post #2


Newbie


Group: Guests
Posts: 0
Joined: 16-June 08
Member No.: 2,304
Location: USA
Drives: Honda



Check all the fuses under the hood (as well as at drivers feet). Should be on passenger side. If those fuses also good, then it's time to forget about radio work and go back to basics. Get a wiring manual and see where you have power and don't. I got my manual at library. Good luck! al > Hello all, > I am new to this group. My wife recently had a radio/cd installed > that has the removable face plate. Well..she was messing around with > reseating the face plate WHILE THE ENGINE WAS RUNNING and suddenly it > just died. Now it will not start. I suspected a fuse someplace had > blown but a check of the fuse panel under the hood and user the dash > with a DVM meter finds no fuses blown. > > Any ideas? > > Thanks > Jerry
Go to the top of the page
 
+Quote Post


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:



 

RSS   Time is now: 20th November 2008 - 02:40 AM