|
Will,
Where are you? I'm in Orange County, CA. I have a Blue 1997 3.2TL.
I've seen Inspire tailights on ebay before. Some guy in Japan sells
them and usually gets aroung $300+s/h. You can clear the lens, but
it's not pretty. I suppose the method is the same as with the Vigor.
-Remove the lights
-Use a Dremel (smallest bit) to separate the sections (around the
edge of the lens).
-Remove amber part (should just pop out).
-Use GOOP Automotive sealant or epoxy to re-seal the lens to the
housing.
-Install in car.
See: http://acuravigorclub.com/
http://pw2.netcom.com/~gentile/Vigor/FAQs3.htm#clearcorners
|